ECS H110M-C3V User Manual

Chapter 3
H110M-C3V/H110M-C3D USER MANUAL
30
Press the delete key to access BIOS Setup Utility.
Resetting the Default CMOS Values
When powering on for the first time, the POST screen may show a “CMOS Settings
Wrong” message. This standard message will appear following a clear CMOS data
at factory by the manufacturer. You simply need to Load Default Settings to reset
the default CMOS values.
Note: Changes to system hardware such as different CPU, memories, etc. may
also trigger this message.

ECS H110M-C3V Specifications

General

Brand	ECS
Model	H110M-C3V
Category	Motherboard
Language	English