Chapter 3
H110M-C3V/H110M-C3D USER MANUAL
51
ME Configuration
Scroll to this item and press <Enter> to view the following screen:
ME Control (Enabled)
Use this item to enable or disable the ME Firmware.
Main Advanced Chipset Tweak Security Boot Exit
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Enable/Disable ME Firmware
ME FW Version (11.0.0.1136)
This item shows the ME FW version.
Press <Esc> to return to the Chipset Menu page.
Management Engine Technology Configuration
ME Control Enabled
TPM Device Selection dTPM 1.2
ME FW Version 11.0.0.1136
TPM Device Selection (dTPM 1.2)
Use this item to select TPM device: PTT or dTPM. PTT-Enables PTT in SkuMgr. dTPM
1.2-Disables PTT in SkuMgr Warning! PTT/dTPM will be disabled and all data saved
on it will be lost.
To Next Page
Loading...
Need help?
General
