ECS H61H2-M2

37
Using BIOS
fSerial Port 0 Configuration
This item shows the information of the super IO chip.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F 8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Serial Port 0 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
Change Settings [Auto]
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Super IO Configuration
Scroll to this item and press <Enter> to view the following screen:
Super IO Configuration
Super IO Chip IT8728
Serial Port 0 Configutation
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main
Advanced Chipset M.I.B III Boot Security Save & Exit
Version 2.02.1205. Copyright (C) 2012, American Megatrends, Inc.
Set Parameters of Serial Port
0 (COMA)
ff
ff
f
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Press <Esc> to return to the Super IO Configuration page.
Press <Esc> to return to the Advanced Menu page.
Super IO Chip (IT8728)
This item shows the information of the super IO chip.