42
Using BIOS
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5;
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enable or Disable Parallel Port
(LPT/LPTE)
Change Settings [Auto]
Device Mode [Standard Parallel ...]
Main Advanced Chipset M.I.B III Boot Security Save & Exit
+/- : Change Opt.
Enter : Select
F1: General Help
:Select Screen
:Select Item
F2: Previous Values
F3: Optimized Defaults
ESC: Exit
F4: Save & Exit
Parallel Port Configuration
Scroll to this item and press <Enter> to view the following screen:
Parallel Port (Enabled)
This item allows you to enable or disable parallel port.
Device Settings (IO=3F 8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Device Mode (Standard Parallel ...)
Use this item to select device mode.
Press <Esc> to return to the Advanced Menu page.
To Next Page
Loading...
Need help?
General
