ECS K7VMM+ - Checking Jumper Settings; Jumper Settings

Checking Jumper Settings
The following illustration shows the location of the mainboard jumpers. Pin 1 is
labeled.
Jumper Settings
Jumper Type Description Setting (default)
JP2 3-pin Clear CMOS
Memory jumper
1-2: Clear CMOS
2-3: Normal
JP2
1
JP3 3-pin CPU Clock Se-
lector
1-2: 100MHz
2-3: 133MHz
JP3
1
JP5 3-pin Keyboard Power
On Selector
1-2: Disable Key-
board Power On
2-3: Enable Key-
board Power On
JP5
1
9