LIVA X MINI PC USER MANUAL
17
Chapter 2
Power Management Setup
This page sets up some parameters for system power management
operation.
:Select Screen
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
+/- : Change Opt.
Enter : Select
:Select Item
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Power Management Setup
Resume By PME [Disabled]
Resume By USB [Enabled]
Resume By RTC Alarm [Disabled]
EUP Function [Enabled]
About Resume by
PCI/PCI-E/LAN/
Ext .USB3.0 PME
Resume By PME (Disabled)
This item specify whether the system will be awakened from power
saving modes when activity or input signal of the specified
hardware peripheral or components is detected.
Resume By USB (Enabled)
This item allows you to enable/disable the USB device wakeup
function from S3 mode.
Resume By RTC Alarm (Disabled)
The system can be turned off with a software command. If you
enable this item, the system can automatically resume at a fixed
time based on the system’s RTC (realtime clock). Use the items
below this one to set the date and time of the wakeup alarm. You
must use an ATX power supply in order to use this feature.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
