ECS P49G Series User Manual

23
Chapter 3: BIOS Setup Utility
IDE Devices
f
Your computer has one IDE channel which can be installed with one or two devices
(
Master and Slave). In addition, this motherboard supports two SATA channels and each
channel allows one SATA device to be installed. Use these items to configure each
device on the IDE channel.
Type (Auto)
Use this item to configure the type of the IDE device that you specify. If the feature
is enabled, it will enhance hard disk performance by reading or writing more data during
each transfer.
CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Primary IDE Master
Device : ATAPI CDROM
Vendor : DVD-ROM DDU1632
LBA Mode : Supported
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-2
Type Auto
PIO Mode Auto
DMA Mode Auto
Help Item
F10: Save ESC: Exit
mnlk
: Move Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
DMA Mode
DMA capability allows user to improve the transfer-speed and data-integrity for
compatible IDE devices.
PIO Mode
Use this item to set the PIO mode to enhance hard disk performance by optimizing
the hard disk timing.
Press <Esc> to return to the Standard CMOS Setup page.
Select the type
of device connected
to the system.
IDE BusMaster
This item enables or disables the DMA under DOS mode. We recommend you to
leave this item at the default value.
IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave
this item at the default value.
Press <Esc> to return to the main menu setting page.

ECS P49G Series Specifications

General

Brand	ECS
Model	P49G Series
Category	Motherboard
Language	English