35
Chapter 3: BIOS Setup Utility
CPU Frequency
This item indicates the current CPU frequency. Users can not make any change to
this item. Please noted that the frequency will be varied with different CPU.
CPU Frequency Setting (333MHz)
This item is used to set the CPU Frequency.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Auto Detect DIMM/PCI Clk (Enabled)
When this ite
m is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Press <Esc> to return to the main menu setting page.
Load Default Settings
This option opens a dialog box that lets you install stability-oriented defaults for
all appropriate items in the Setup Utility. Select <OK> and then press <Enter> to
install the defaults. Select <Cancel> and then press <Enter> to not install the
defaults.
Supervisor Password Page
This page helps you set up some parameters for the hardware monitoring
function of this motherboard.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
Supervisor Password : Not Installed
Change Supervisor Password
Installed or Change the
password.
Press Enter
Change Supervisor Password
You can select this option and press<Enter> to access the sub menu. You can use
the sub menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Supervisor Password
This item indicates whether a supervisor password has been set. If the password
has been installed , Installed displays. If not, Not Installed dispalys.
To Next Page
Loading...
Need help?
General
