36
Motherboard User’s Guide
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
press [OK] to save and exit, or press [Cancel] to return to the main menu.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made in
the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog
box appears, press [OK] to discard changes and exit, or press [Cancel] to return to
the main menu.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
User Password
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
User Password : Not Installed
User Password Page
This page helps you set up some parameters for the hardware monitoring
function of this motherboard.
Note: If you have made settings that you do not want to save, use the “Exit
Without Saving” item and presst [OK] to discard any changes you have
made.
Press <Esc> to return to the main menu setting page.
Change User Password Press Enter
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been
installed, Installed displays. If not, Not Installed displays.
Change User Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use
the sub menu to change the user password.
To Next Page
Loading...
Need help?
General
