To Next Page

To Previous Page

35 CPU post-memory initialization. Boot Strap Processor (BSP) selection

36 CPU post-memory initialization. System Management Mode (SMM) initialization

37 Post-Memory North Bridge initialization is started

38 Post-Memory North Bridge initialization (North Bridge module specific)

39 Post-Memory North Bridge initialization (North Bridge module specific)

3A Post-Memory North Bridge initialization (North Bridge module specific)

3B Post-Memory South Bridge initialization is started

3C Post-Memory South Bridge initialization (South Bridge module specific)

3D Post-Memory South Bridge initialization (South Bridge module specific)

3E Post-Memory South Bridge initialization (South Bridge module specific)

3F-4E OEM post memory initialization codes

4F DXE IPL is started

50 Memory initialization error. Invalid memory type or incompatible memory speed

51 Memory initialization error. SPD reading has failed

52 Memory initialization error. Invalid memory size or memory modules do not match.

53 Memory initialization error. No usable memory detected

54 Unspecified memory initialization error.

55 Memory not installed

56 Invalid CPU type or Speed

57 CPU mismatch

58 CPU self test failed or possible CPU cache error

59 CPU micro-code is not found or micro-code update is failed

5A Internal CPU error

5B reset PPI is not available

5C-5F Reserved for future AMI error codes

E0 S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)

E1 S3 Boot Script execution

E2 Video repost

E3 OS S3 wake vector call

E4-E7 Reserved for future AMI progress codes

E0 S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)

E8 S3 Resume Failed in PEI

E9 S3 Resume PPI not Found

EA S3 Resume Boot Script Error

EB S3 OS Wake Error

EC-EF Reserved for future AMI error codes

F0 Recovery condition triggered by firmware (Auto recovery)

F1 Recovery condition triggered by user (Forced recovery)

F2 Recovery process started

F3 Recovery firmware image is found

F4 Recovery firmware image is loaded

F5-F7 Reserved for future AMI progress codes

F0 Recovery condition triggered by firmware (Auto recovery)

F1 Recovery condition triggered by user (Forced recovery)

F2 Recovery process started

F3 Recovery firmware image is found

F4 Recovery firmware image is loaded

F5-F7 Reserved for future AMI progress codes

F8 Recovery PPI is not available

F9 Recovery capsule is not found

FA Invalid recovery capsule

Questions and Answers:

Need help?

Do you have a question about the ECS P67H2-A2 and is the answer not in the manual?

ECS P67H2-A2 Specifications

General

Memory channels	Dual-channel
Number of memory slots	4
Maximum internal memory	32 GB
Supported memory clock speeds	1066, 1333, 1600, 1866, 2133 MHz
Processor socket	LGA 1155 (Socket H2)
Processor manufacturer	Intel
Compatible processor series	Intel Celeron, Intel Pentium
Maximum number of SMP processors	1
USB 2.0 connectors	3
Power fan connector	Yes
Number of SATA III connectors	6
Number of Parallel ATA connectors	0
USB 2.0 ports quantity	8
Ethernet LAN (RJ-45) ports	2
Audio chip	Realtek ALC892
Component for	PC
Motherboard chipset	Intel® P67
Audio output channels	7.1 channels
Motherboard form factor	ATX
Compatible operating systems	Windows 7 32 bit/64 bit
PCI Express slots version	2.0
On-board graphics card	No
RAID levels	0, 1, 5, 10
LAN controller	RealTek RTL8111E
Ethernet interface type	Gigabit Ethernet
BIOS type	AMI
ACPI version	-
BIOS memory size	32 Mbit