36
Using BIOS
SATA Configuration
Use this item to show the mode of serial SATA configuration options.
SATA Configuration
SATA Mode [IDE Mode]
Serial-ATA Controller 0 [Compatible]
Serial-ATA Controller 1 [Enhanced]
eSATA 6Gb/s Controller Mode [AHCI Mode]
SATA 6Gb/s Controller Mode [AHCI Mode]
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 HDS728080PLA38 (82.3G
SATA Port4 Not Present
SATA Port5 SONY DVD RW ATAPI
SATA Port6 Not Present
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
+/- : Change Opt.
:Select Screen
:Select Item
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Enter : Select
(1) IDE Mode. (2) AHCI Mode.
(3) RAID Mode.
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Serial-ATA Controller 0/1 (Compatible/Enhanced)
Use this item to show the Serial-ATA cotroller options: Disabled, Compatible, En-
hanced.
SATA Mode (IDE Mode)
Use this item to select SATA mode.
SATA Port 0~6
This motherboard supports six SATA channel and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
eSATA 6 Gb/s Controller Mode (AHCI Mode)
Use this item to select eSATA 6 Gb/s controller mode.
Press <Esc> to return to the Advanced Menu page.
SATA 6 Gb/s Controller Mode (AHCI Mode)
Use this item to select SATA 6 Gb/s controller mode.
To Next Page
Loading...
