6
Table of Motherboard Components
Label Component
1394A2* IEEE 1394a header
AGP1 Accelerated Graphics Port
ATX1 Standard 20-pin ATX power connector
ATX2 ATX12V power connector
AUDIO1 Front audio connector
AUXIN1 Auxiliary Audio input header
CASFAN1 Case fan connector
CDIN1 Primary CD-in connector
COM2 Onboard serial port header COM2
CPU SOCKET Micro PGA 478-pin socket for Pentium 4 CPUs
CPUFAN1 Cooling fan for CPU
DIMM1~ DIMM2 Two 184-pin DDR SDRAM
FDD1 Floppy disk drive connector
IDE 1 Primary IDE channel
IDE 2 Secondary IDE channel
JP1 Clear CMOS jumper
JP3 BIOS flash protect jumper
LSIR1* Serial Infrared port
PANEL1 Connector for case front panel switches and LED indicators
PCI1 ~ PCI3 Three 32-bit add-on card slots
SATA1 ~ SATA2* Two Serial ATA headers
SJ1 Single color LED header
SPDIFO1 SPDIF out header
USB3 ~ USB4 Two connectors for front panel USB ports
WOL1 Wake on LAN
WOM1 Wake on Modem
*Optional component
This concludes Chapter 1. The next chapter explains how to install the moth-
erboard.
To Next Page
Loading...
