SE-1515 PC ECG User Manual Introduction
- 18 -
Resting ECG Cable Exercise ECG Cable
Burglar Lock DX12 Belt
Assembly
Drawing
1) Insert plug 1 of the patient cable into socket 2 of DX12 transmitter.
2) Insert DX12 transmitter into pocket 3 of DX12 belt, and then wear the belt around the waist.
3) Insert plug 8 of the cable into socket 6 of the DX12 receiver.
4) Insert plug 9 of the cable into the USB socket of the PC.
5) Connect plug 10 of the cable to the BP monitor (for exercise ECG only).
To Next Page
Loading...
