EDAN SE-1515 - Chapter 9 Hint Information; 9.1 Hint Information and Causes

SE-1515 PC ECG User Manual System Setup
- 77 -
8.2 Display Setup
In the Display Setting window, you can select the items to be displayed on the New Patient and
order window. You can also configure the order function.
8.3 Transmission Setup
Item
Description
UART
Transmission
Enable UART transmission and select transmission protocol.
When Ymodem is selected, choose UART (Ymodem)
When EdanSerial is selected, choose UART.
Synchronize ECG
Time
When transmitting order records to an ECG machine, the system time of
the ECG machine will also be synchronized automatically.
Port
You can configure the COM ports used for serial transmission.
Match Type
Options provided are: Request No., Exam. ID., Patient ID, Outpatient
ID, Inpatient ID, Physical Exam. ID, and None.
 No
When examination records are uploaded from the ECG machine, the
records will not be matched with the order information.
 Request No./Exam. ID./Patient ID/Outpatient ID/Inpatient No.
When downloading order information to the ECG machine, the
patient ID in the ECG machine must be the same as the Request
No./Exam. ID./Patient ID/Outpatient /Inpatient No. of the patient.
Exam. Device
 ECG machine
When checking the order information, the system automatically
receives data and waits for the data to be transmitted from the ECG
machine.
 PC sampling box
When checking the order information, the system opens the
corresponding sampling screen based on the checked item.
Hint Mode
Options provided are Sound, Blink, and Diaglog Box
Hint Sound
The Hint Sound can be configured only when Hint Mode is set to
Sound.
Hint Sound
The Hint Sound Interval can be configured only when Hint Mode is set