SE-1515 PC ECG User Manual Introduction
- 19 -
6) Connect a treadmill or an ergometer to the PC (for exercise ECG only).
7) Connect a printer to the PC.
8) Insert the Sentinel into the USB socket of the PC if the sentinel is purchased.
9) Unlock burglar lock 11 and insert into the burglar lock keyhole of DX12 receiver, and fix the
wireless system via the other end of the burglar lock.
10) Make sure that the above parts are properly connected, and then connect the PC,
treadmill/ergometer and printer to the power supply.
2.2.3 ECG Sampling Box
2.2.3.1 Receiver
2.2.3.2 Transmitter
Button and Symbol
Figure 2-1 DX12 Transmitter Main Screen
To Next Page
Loading...
