SE-601 Series Electrocardiograph Service Manual Optional and Advanced Functions
- 19 -
Chapter 4 Optional and Advanced Functions
When the System Setup screen is displayed, press F1 on the keyboard to display the Service
Password window. After you enter the correct password and press Enter, the Advanced Setup
screen (Figure 4-1) appears.
On the Advanced Setup screen, press Tab/Shift + Tab, or F1/F2/F3/F4 to move the cursor to a
certain sub-item, and then press Enter to open the screen related to the sub-item.
Figure 4-1 Advanced Setup Screen
4.1 Configuring a Bar Code Reader
1. When the Advanced Setup screen is displayed, press Tab/Shift + Tab, or F1/F2/F3/F4 to
move the cursor to Barcode, and then press Enter to open the Barcode Setup window.
理邦保密文件
EDAN CONFIDENTIAL
To Next Page
Loading...
