EasyManua.ls Logo

Edge-Core EAP102 - General Status; Figure 16: General Status Information

Edge-Core EAP102
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2
| Status Information
General Status
– 33 –
General Status
The General Status section shows descriptive information about the AP.
Figure 16: General Status Information
The following items are displayed in the “Port Status” section:
Ethernet Port #0 Shows the status of the WAN Ethernet port, including link-
up state, speed, and duplex mode.
Ethernet Port #1 — Shows the status of the LAN Ethernet port 1, including
link-up state, speed, and duplex mode.
Ethernet Port #2 — Shows the status of the LAN Ethernet port 2, including
link-up state, speed, and duplex mode.
The following items are displayed in the “Internet Info” section:
Internet Status — Shows whether or not the Internet connection is up.
Internet Source — The Ethernet port connected to the Internet. By default, this
is Ethernet Port 0.
IP Address — IP address of the Internet connection.
Mode — Shows if the IP address is a static setting or set by DHCP.

Table of Contents

Related product manuals