Chapter 2
| Status Information
Wireless Status
– 37 –
Wireless Status
The Wireless Status section shows information about the radio settings and
associated clients.
Figure 20: Wireless Status
Note that you can click the red button next to an associated client to force
disconnection.
The following items are displayed in this section:
Wireless Radio 5 GHz/2.4 GHz — Indicates the 2.4 GHz or 5 GHz wireless
interface.
Radio Status — Shows if the wireless interface is enabled or disabled.
IEEE Mode — The 802.11 wireless LAN standards supported by the AP.
Op Mode — Shows if the wireless interface is configured to operate in an
access point mode or client mode.
To Next Page
Loading...
