Edge-Core EAP102 - Figure 42: Physical Settings for Radio 2.4 Ghz

Chapter 4 | Wireless Settings
Radio Settings
– 65 –
Figure 42: Physical Settings for Radio 2.4 GHz
The following items are displayed on this page:
 Status — Enables or disables the wireless service on this interface.
 Mode — Selects the mode in which the AP will function.
 Access Point (Auto-WDS) — The AP operates as an access point in WDS
mode, which accepts connections from APs in Client WDS mode. (This is
the default setting.)
In this mode, the AP provides services to clients as a normal access point.
WDS is used to automatically search for and connect to other AP nodes
using the same SSID and security settings.
 Client — The AP can provide a wireless connection to another AP, as well
as pass information from or to locally wired hosts and wireless clients.
 802.11 Mode — Defines the radio operation mode.
 Radio 2.4 GHz — Default: 11ax; Options: 11b+g+n/ax
 Radio 5 GHz — Default: 11ax; Options: 11a, 11a+n, 11ac+a+n, 11ax