Chapter 5
| System Settings
User Accounts
– 88 –
Figure 57: Upload Certificate
The following items are displayed on this page:
Upload Certificate — Click to upload a security certificate and private key
from a trusted certification authority.
Use Default Certificate — Click to reset to use the AP’s default certificate.
User Accounts
The User Accounts page allows you to control management access to the AP based
on manually configured user names and passwords.
Figure 58: User Accounts
The following items are displayed on this page:
Enabled — Click to enable or disable the user account.
Username — The name of the user. (Range: 1-32 ASCII characters. Only
accepts A-Z, a-z, 0-9, period “.”, underscore “_”, and hyphen “-”. Usernames
cannot begin with a hyphen “-” or period “.”.)
To Next Page
Loading...
