Chapter 3
| Network Settings
Hotspot Settings
– 52 –
Internal IP address — The internal destination IP address.
Internal Port — The internal destination protocol port. (Range: 1-65535)
Hotspot Settings
The Hotspot Settings page can configure Internet access to the general public in
places such as coffee houses, libraries and hospitals. Specific access rights may
also be defined through a RADIUS server.
Network Settings This section includes the option to enable or disable hotspot service, hotspot mode
options, and network settings.
Figure 34: Hotspot Settings (Network Settings)
The following items are displayed on this page:
Enable Hotspot Service — Enables or disables hotspot service. A hotspot is a
physical location where people may obtain Internet access, typically using Wi-Fi
technology, via a wireless local area network using a router connected to an
Internet service provider.
Mode — Hotspot service types include the following options:
External Captive Portal Service — This option will show the hotspot guest
an externally hosted captive portal splash page and may prompt them to
login, depending on how you've configured your service settings. Choose
this option if you've signed up with a third-party captive portal service
provider such as Cloud4Wi or HotSpotSystem.
To Next Page
Loading...
