Chapter 3
| Network Settings
OpenRoaming
– 59 –
Wall Garden — A list of web sites to which unauthenticated users are
allowed to navigate. Enter a list of space or newline-delimited host names
and IP addresses.
Venue Name Information — Configures a list of up to 10 venue names.
Language Code — Select a language from the list. (Default: English)
Venue Name — The name of the network venue. Multiple names can be
added to the list.
Venue URL — Specifies a URL that provides additional venue information
to users.
Cellular Network Information List (PLMN) — (Optional) Identifies the 3GPP
cellular networks available through the AP. Specifically, this field identifies the
Public Land Mobile Network (PLMN) ID, comprised of the Mobile Country Code
(MCC) and Mobile Network Code (MNC) of the mobile operator. Up to 10
PLMN IDs can be configured. Input the pair of MCC, MNC.
For example: 400, 00
MCC: Three decimal digits (000-999)
MNC: Two (00-99) or three decimal digits (000-999)
Operator Friendly Name — The name of the network operator and the
specified language. Up to 10 names can be configured.
Roaming Consortium List — (Optional) A roaming consortium is a group of
service providers (SP) with which a user’s credentials can be used for
authentication. Each roaming consortium is identified by an organization
identifier (OI) that is assigned by the IEEE. An OI is often 24 bits in length, but
can also be 36 bits. Up to 10 identifiers can be configured.
Domain Name List — Lists one or up to 10 domain names for the entity
operating the AP. This is critical for OpenRoaming network selection policy, as it
identifies the operator of the network. It indicates to the mobile device whether
they are at a home hotspot or a visited hotspot.
NAI Realm List — (Optional) The network access identifier (NAI) realm list
identifies those service provider or other networks that are accessible through
the AP. By discovering which authentication realms are supported by a network,
a mobile device can selectively authenticate to its preferred network. Up to 10
identifiers can be configured.
Method/Authentication — Specifies EAP methods and authentication for
each service provider added to the NAI Realm List.
To Next Page
Loading...
