Chapter 4
| Wireless Settings
Radio Settings
– 72 –
Radius Auth Server — Specifies the IP address or host name of
the backup RADIUS authentication server.
Radius Auth Port — The UDP port number used by the backup
RADIUS server for authentication messages. (Range: 1024-65535;
Default: 1812)
Radius Auth Secret — A shared text string used to encrypt
messages between the access point and the RADIUS server. Be sure
that the same text string is specified on the backup RADIUS
authentication server. Do not use blank spaces in the string.
(Maximum length: 200 characters)
Use Radius Accounting — Enables the support of a RADIUS
accounting server.
Acct Server — Specifies the IP address or host name of the
RADIUS accounting server.
Acct Port — The UDP port number used by the RADIUS server for
accounting messages. (Range: 1024-65535; Default: 1813)
Acct Secret — A shared text string used to encrypt messages
between the access point and the RADIUS server. Be sure that the
same text string is specified on the RADIUS accounting server. Do
not use blank spaces in the string. (Maximum length: 200
characters)
Acct Interim Interval — The time (in seconds) between each
accounting update sent to the server. (Range: 60-600 seconds;
Default: 60 seconds)
WPA2-EAP — WPA was introduced as an interim solution for the
vulnerability of WEP pending the ratification of the IEEE 802.11i wireless
security standard. In effect, the WPA security features are a subset of the
802.11i standard. WPA2 includes the now ratified 802.11i standard, but
also offers backward compatibility with WPA. Therefore, WPA2 includes the
same 802.1X and PSK modes of operation and support for TKIP
encryption.
A RADIUS server is used for authentication, and can also be used to
accounting.
Refer to WPA-PSK for a description of encryption methods.
Refer to WPA-EAP for a information on configuring the RADIUS server.
WPA3 Personal — Clients using WPA3 with Simultaneous Authentication
of Equals (SAE) are accepted for authentication.
To Next Page
Loading...
