Edge-Core ECS2100-10T User Manual (English)

To Next Page

– 1 –

Quick Start Guide

1. Unpack the Switch and Check Contents

ECS2100-10T

ECS2100-10PE

ECS2100-10P

ECS2100-28T

ECS2100-28P

ECS2100-28PP

ECS2100-52T

ECS2110-26T

Rack Mounting Kit—two brackets and eight screws

Four adhesive foot pads

Power Cord—either Japan, US, Continental Europe

or UK

Console Cable—RJ-45 to DB-9 (Optional item)

Documentation—Quick Start Guide (this document)

and Safety and Regulatory Information

Note:

The ECS2100 series switches are for indoor use only.

Note:

For Safety and Regulatory information, refer to the

Safety and Regulatory Information document included with

the switch.

Note:

Other documentation, including the Installation

Guide, Web Management Guide, and CLI Reference Guide,

can be obtained from www.edge-core.com.

2. Mount the Switch

a. Mounting in a Rack

Attach the brackets to the switch.

Use the screws and cage nuts supplied with the rack to

secure the switch in the rack.

Caution:

Installing the switch in a rack requires two

people. One person should position the switch in the rack,

while the other secures it using the rack screws.

Note:

The switch can also be installed on a desktop or shelf

using the included adhesive rubber foot pads.

b. Mounting in a Rack (ECS2100-10PE only)

Caution:

For safe operation, install the switch with RJ-45

ports facing up.

Set two screws in the wall 150 mm (5.9 in.) apart.

Slide the switch’s wall mounting slots down onto the screws so

that the unit is secure.

E012017-AP-R02

150200001287A

www.edge-core.com

10/28/52-Port Web-Smart Pro Gigabit Ethernet Switch

26-Port Web-Smart Pro 10G Ethernet Switch

Other manuals for Edge-Core ECS2100-10T

Installation Guide51 pages

Reference Guide725 pages

Need help?

Do you have a question about the Edge-Core ECS2100-10T and is the answer not in the manual?

Edge-Core ECS2100-10T Specifications

General

Device Type	Managed Switch
Number of Ports	10
Port Type	Gigabit Ethernet
Layer	Layer 2
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
MAC Address Table Size	8K
Power over Ethernet (PoE)	No
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40 to 70 °C
Humidity	10% to 90% (non-condensing)
Ports	8 x 10/100/1000BASE-T, 2 x 100/1000BASE-X SFP
Jumbo Frame Support	9KB