Chapter 4
| System Management Commands
Time
– 183 –
NTP Status : Disabled
NTP Authenticate Status : Enabled
Last Update NTP Server : 0.0.0.0 Port: 0
Last Update Time : Jan 1 00:00:00 1970 UTC
NTP Server 192.168.3.20 version 3
NTP Server 192.168.3.21 version 3
NTP Server 192.168.4.22 version 3 key 19
NTP Authentication Key 19 md5 42V68751663T6K11P2J307210R885
Console#
Manual Configuration Commands
clock summer-time
(date)
This command sets the start, end, and offset times of summer time (daylight
savings time) for the switch on a one-time basis. Use the no form to disable
summer time.
Syntax
clock summer-time name date b-date b-month b-year b-hour b-minute e-date
e-month e-year e-hour e-minute [offset]
no clock summer-time
name - Name of the time zone while summer time is in effect, usually an
acronym. (Range: 1-30 characters)
b-date - Day of the month when summer time will begin. (Range: 1-31)
b-month - The month when summer time will begin. (Options: january |
february | march | april | may | june | july | august | september | october
| november | december)
b-year- The year summer time will begin.
b-hour - The hour summer time will begin. (Range: 0-23 hours)
b-minute - The minute summer time will begin. (Range: 0-59 minutes)
e-date - Day of the month when summer time will end. (Range: 1-31)
e-month - The month when summer time will end. (Options: january |
february | march | april | may | june | july | august | september | october
| november | december)
e-year - The year summer time will end.
e-hour - The hour summer time will end. (Range: 0-23 hours)
e-minute - The minute summer time will end. (Range: 0-59 minutes)
offset - Summer time offset from the regular time zone, in minutes.
(Range: 1-120 minutes)
Default Setting
Disabled
To Next Page
Loading...
