Edge-Core ECS4620-28F-2AC Cli Reference Guide

Chapter 27 | OAM Commands
– 866 –
clear efm oam
counters
This command clears statistical counters for various OAMPDU message types.
Syntax
clear efm oam counters [interface-list]
interface-list - unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number or list of ports. To enter a list, separate
nonconsecutive port identifiers with a comma and no spaces; use a
hyphen to designate a range of ports. (Range: 1-28/52)
Command Mode
Privileged Exec
Example
Console#clear efm oam counters
Console#
Related Commands
show efm oam counters interface (869)
clear efm oam
event-log
This command clears all entries from the OAM event log for the specified port.
Syntax
clear efm oam event-log [interface-list]
unit - Unit identifier. (Range: 1-8)
port - Port number or list of ports. To enter a list, separate nonconsecutive
port identifiers with a comma and no spaces; use a hyphen to designate a
range of ports. (Range: 1-28/52)
Command Mode
Privileged Exec
Example
Console#clear efm oam event-log
Console#

Edge-Core ECS4620-28F-2AC Specifications

General

Model	ECS4620-28F-2AC
Ports	28
SFP Ports	24
Power over Ethernet (PoE)	No
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	L2/L3
MAC Address Table Size	16K
VLANs	4K
Weight	3.5 kg
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Type	Switch
10G SFP+ Ports	4
Power Supply	AC: 100~240VAC, 50/60 Hz
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1P, IEEE 802.1D, IEEE 802.1S, IEEE 802.1W