How to Use This Guide
– 4 –
◆ Chapter 5 - Port Connections — Includes information on network interfaces,
installing optional transceivers, and cabling specifications.
◆ Chapter 6 - Switch Management — Connecting to the switch for management,
and information on the system status LEDs.
◆ Appendix A - Troubleshooting — Information for troubleshooting switch
installation and operation.
Related
Documentation
This guide focuses on switch hardware and installation, it does not cover software
configuration of the switch. For specific information on how to operate and use the
management functions of the switch, see the following guides:
Web Management Guide
CLI Reference Guide
For all safety information and regulatory statements, see the following documents:
Quick Start Guide
Safety and Regulatory Information
Conventions The following conventions are used throughout this guide to show information:
Note:
Emphasizes important information or calls your attention to related features
or instructions.
Caution:
Alerts you to a potential hazard that could cause loss of data, or damage
the system or equipment.
Warning:
Alerts you to a potential hazard that could cause personal injury.
Revision History This section summarizes the changes in each revision of this guide.
November 2016 Revision
This is the fifth revision of this guide. It includes the following change:
◆ Updated stack backplane connection information.
To Next Page
Loading...
Need help?
General