19
Heating Element
The Heating Element maintains water temperature during the wash and rinse cycles. If the Pressure
Switch is determined to be functioning properly and the Heating Element is still not functioning, the
Heating Element may need to be replaced.
If the Heating Element needs to be replaced, please follow the below procedures:
1. Disconnect power and open the dishwasher door
2. Remove the upper and lower dishwasher baskets
3. Remove the bottom board and disconnect 2 terminals
4. Remove the rubber covers from the heating element
5. Remove the screw and remove heating element
6. Reverse the above procedure to install new heating element
To Next Page
Loading...
