353 7 oz. Half Barrel (full size) Keg = 6.75 Cases of 12 ounce Bottles
4 6 oz.
CONVERTING THE BEER DISPENSER
TO AN ALL-REFRIGERATOR
This dispenser can be converted to an all-refrigerator appliance.
1. Safely disconnect the CO
2
, keg, and all lines. Make sure the CO
2
tank is closed
before unhooking anything from the system. Re-plug the hole in the back of the
cabinet. Remove the keg and all fittings.
2. Remove the beer tower and re-plug the hole in the top of the cabinet.
3. Install the two wire shelves.
4. The conversion is now complete. Store all the removed accessories in a safe
place for future use.
Note: Refer to the CO
2
cylinder safety precautions for storage recommendations.
5. Adjust the temperature of the unit as required for food storage.
Note: Allow the beer dispenser to stand in an upright position for 8 hours before
turning on the power.
CLEANING & MAINTAING YOUR DRAFT BEER
DISPENSER
A regular cleaning once every 2 weeks of the faucet, beer hose, and keg coupler is
extremely important when the Draft Beer Dispenser is used frequently. If this is not
performed, the beer will foam. Additionally bacteria, yeast, mold, and beer stone will
build up and quickly degrade the quality of draft beer. A few minutes spent cleaning on a
regular basis will add life to your system, and improve the quality of your draft beer!
FOR INFORMATION ON PURCHASING CLEANING KITS PLEASE
CONTACT EDGESTAR CUSTOMER SERVICE ONLINE VIA EMAIL AT
service@edgestar.com OR BY TELEPHONE AT 1-866-319-5473.
13
To Next Page
Loading...
Need help?
General
