UNPACKING ACCESSORIES AND INVENTORY
Your Draft Beer Dispenser is supplied with all the accessories you need to install and tap
a standard American Sankey Tap ½ barrel keg. This unit can also fit ¼ barrel, 1/6 barrel,
and Cornelius kegs with standard American Sankey Tap connections.
All you need to do is set up the Draft Beer Dispenser, supply the full keg of beer,
and fill the CO
2
tank.
Suggested accessories include:
A cleaning kit
Different types of taps
And more…
For more information on compatible accessories, feel free to email service@edgestar.com
or call toll-free 866-319-5473.
Additional Accessories
Proper Location
• To guarantee that your Draft Beer Dispenser will last for years to
come, install it in a location where there is proper air circulation
and electrical connections.
This
appliance
is designed
for
“indoor”
use only
and should
not be used
outdoors
• Keep the beer dispenser away from heat and direct sunlight.
• This beer dispenser is designed for indoor use only and should
not be used outdoors.
• This beer dispenser should not be placed in a built-in or recessed
area. It is designed to be freestanding.
• The following dimensions are the recommended clearances
around the beer dispenser.
Sides------------3/4” (19mm)
Back---------------1” (25 mm)
4
To Next Page
Loading...
Need help?
General
