6
Installing and Removing the Shelves
To install a shelf:
1. Open the door completely.
2. Align the inside, thinner edge of the shelf with the corresponding shelf track in the interior of
the wine cooler.
3. Slide the shelf onto the shelf track and slowly push back until it stops.
To remove a shelf:
1. Open the door completely.
2. Pull the shelf towards you until it is completely removed from the interior of the wine cooler.
Operation
Installation Checklist Before Operation
1. Have all packaging materials and tape been removed from the interior and exterior of the
wine cooler?
2. Have the installation instructions been followed, including connecting the machine to
electricity? And has proper grounding been installed for the wine cooler?
3. Has the machine been leveled?
4. Is the wine cooler in a site where the ambient temperature is around 78° F all year round?
5. Is there a clearance of at least 10” at the rear, 5” at the top, and 5” at the sides for proper air
circulation?
To Next Page
Loading...
