Edgewater Networks EdgeMarc 4800 User Manual

© 2016 Edgewater Networks. All Rights Reserved. 21
3
Configuring Basic Network
Settings
This chapter explains how to connect to the EdgeMarc and access the
graphical user interface (GUI) to configure basic network settings for the
first time. Refer to the EdgeMarc User Guide for complete details on how to
configure your EdgeMarc device for your network deployment.
 Connecting to the EdgeMarc for the First Time
 Deploying the EdgeMarc 4800 Session Border Controller
Connecting to the EdgeMarc for the First Time
The LAN interface ports are pre-configured with the IP address
192.168.1.1.
1. Connect a computer to the LAN interface port (LAN Port 1) using an
Ethernet cable or connect to an Ethernet switch (using the IP address
192.168.1.2 and subnet mask 255.255.255.0).
2. Launch a web browser on your computer and enter the following URL:
http://192.168.1.1.
3. Press Return. The EdgeMarc login screen is displayed.
4. Enter your initial username in the field provided: root
5. Enter your initial password in the field provided: default
6. Click OK.

Edgewater Networks EdgeMarc 4800 Specifications

General

Brand	Edgewater Networks
Model	EdgeMarc 4800
Category	Controller
Language	English