Edimax IC-7001W - Page 28

24
Network Type
Select “DHCP” to automatically assign an IP
address to your network camera from your
router, or “Static IP” to manually set a static
IP address.
IP Address
Specify an IP address here, which will be the
IP address of your network camera.
Subnet Mask
Enter the subnet mask of the IP address.
Gateway
Enter the gateway address of your network.
Primary DNS
Enter the IP address of your primary DNS
server.
Secondary DNS
Enter the IP address of your secondary DNS
server (optional).
HTTP Port
You can edit the HTTP port number to any
value ( suggested 1024 – 65535). The default
value is 80.