73
VI-3-1-1. Camera
In this tab you can configure all the cameras you wish to connect to. Up to 16
cameras can be connected simultaneously:
Here are the descriptions of all settings:
Select the channel number you wish to set.
All cameras found on your local network will be
displayed in the ‘Camera Search’ box.
Select a camera listed in the ‘Camera Search’ box, and
click the ‘Select’ button to fill all parameters of the
selected camera in every camera configuration field.
Rescan all cameras on your local network. Use this if you
didn’t see the camera you expected in the ‘Camera
Search’ box, or new cameras have been added to your
local network after the last scan.
Input the name of the camera here. The default name is
the first 6 bytes of the camera’s MAC address; you can
change the name of the camera so you can remember
To Next Page
Loading...
