the camera’s location or purpose easily.
Displays the model of the selected camera, this field
cannot be changed.
Input the IP address of the camera.
Input the user name of the camera.
Input the web port of the camera. By default it’s ‘80’.
Input the password of the camera. Default password is
‘1234’. You should change the entered password if you
changed the password of the selected camera.
Select the video encoding format of this camera (MJPEG
or MPEG4).
Clear all fields in the ‘Camera Configuration’ section.
Save settings in this tab.
Discard all settings in this tab.
*: It’s recommended to use ‘Select’ button to fill the content of this field.
**: Only available for cameras support this function.
After you’ve set all channels you wish to set, click ‘OK’ to save settings, and if
everything’s correct, you’ll see the camera’s image in the 16 channel viewer’s
main screen:
To Next Page
Loading...
