Edimax IC-7001W - Page 32

28
3. After the settings are saved, remove the Ethernet cable from your network
camera. Your camera should now be connected to your Wi-Fi.
A
Wireless Connection
Select “Enable” to enable the wireless connection.
B
Available Network (1)
Click “Refresh” to display all available Wi-Fi
networks.
C
Available Network (2)
Select your Wi-Fi network from the list. This is the
wireless network which your camera will connect to.
D
WPA Pre Shared Key
Enter your Wi-Fi password.
E
Save Settings
Click “Save Settings” to save your settings.