5. Push the enclosure (3) gently back into the crystal head (2). If the enclosure and crystal are
correctly fitted, the enclosure will snap into position to secure the crystal head.
If you have mounted the crystal head so that the enclosure faces upwards (for example, for use
in a sputtering system), you may drop the crystal into the crystal head (2)with the front of the
crystal facing out of the aperture. Ensure that the crystal is in the centre of the crystal head (2)
and then carefully push on the enclosure (3).
14
Water Cooled Crystal Holder
To Next Page
Loading...
Need help?
General
