Need help?Do you have a question about the Edwards iXM600 Standard and is the answer not in the manual?
General| Model | iXM600 Standard |
|---|---|
| Manufacturer | Edwards |
| Operating ambient temperature | 5°C to 40°C |
| Storage temperature | -20°C to 60°C |
| Max. humidity | 80% non-condensing |
| Cooling method | Water |
| Water pressure | 2 - 5 bar |
Explains the meaning of different safety notices like WARNING, CAUTION, NOTICE.
Lists and explains various safety symbols used in the manual.
Presents key specifications like dimensions, mass, noise, and performance metrics.
Lists electrical requirements, ratings, and protection details.
Outlines critical safety precautions for installing the system.
Describes the procedure for safely unpacking and checking the pump.
Covers securing the system in place, including seismic restraints.
Summarizes all major connection procedures (vacuum, exhaust, electrical, etc.).
Step-by-step guide to initial system setup and verification.
Details procedures for starting the pump via different control modules.
Explains various methods for safely stopping the pump.
Lists and explains potential warning messages and their causes.
Details alarm conditions, messages, and recommended actions.
Explains sensor triggers for automatic shutdowns.
To Next Page