Need help?Do you have a question about the Edwards iXM200 and is the answer not in the manual?
General| Ultimate Vacuum | 0.1 Pa (0.00075 Torr) |
|---|---|
| Type | Dry pump |
| Outlet Flange | DN 40 ISO-K |
| Max. Inlet Pressure | 1000 hPa (14.5 psi) |
| Operating Ambient Temperature | 5°C to 40°C (41°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Inlet Port | NW40, NW50, CF63 |
| Outlet Port | DN 40 ISO-K |
Details on EU EMC, ROHS, and REACH regulations and exemptions.
General overview of the iXM series dry pumps, their features, and intended applications.
Details on EdCentra for monitoring and the Green Mode functionality.
General technical specifications, operating conditions, and materials in contact with gases.
Technical data on loading, nitrogen purge, and electrical requirements for the system.
Technical data for cooling water systems and heater specifications.
Critical safety warnings, unpacking, inspection, and positioning guidelines for installation.
Procedures for connecting vacuum, exhaust, nitrogen, electrical, and water supplies.
Instructions for installing additional safety equipment for system protection.
Step-by-step procedure for commissioning and leak testing the system.
Configuring the system using the Pump Display Terminal (PDT).
Various methods for starting up and shutting down the pump system.
Adjusting gas module and system operating temperatures.
Procedure for inspecting system connections, pipelines, cables, and fittings.
Information on system warnings, alarms, events, and their indicators.
Details on system events and troubleshooting inverter warnings and alarms.
Safety precautions, relocation, and draining procedures for decommissioning.
Guidelines for safely transporting the system.
Process for returning equipment for service, including required forms.
Information on disconnect boxes and accessory modules.
Details on Pump Display Terminal, holsters, and extension cables.
Information on seismic brackets, flow switches, and interface modules.
To Next Page