EasyManuals Logo

Edwards LaserSense 100 User Manual

Edwards LaserSense 100
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
LaserSense 100 Aspirating Smoke Detector Installers Handbook iii
Important information
Regulatory information
This equipment is Class III as defined in EN 60950 (i.e., this equipment is
designed to operate from Safety Extra Low Voltages and does not generate any
hazardous voltages).
As this equipment is part of a fire detection system, input power should be
supplied from an approved power supply conforming to EN 54-4 or UL/ULC and
FM3230 standards.
In order for the installation to conform to EN 54-20, pipes must conform at least
to EN 61386-1 Class 1131.
This product has been designed to meet the following requirements:
NFPA 72 National Fire Alarm and Signaling Code
UL 268 Smoke Detectors for Fire Alarm Signaling Systems
UL 268A Smoke Detectors for Duct Applications
UL 864 Control Units for Fire Protective Signaling Systems
CAN/ULC-S524 Installation of Fire Alarm Systems
ULC S527 Control Units for Fire Alarm Systems
CAN/ULC-S529 Smoke Detectors for Fire Alarm Systems
System reacceptance test after reprogramming (UL/ULC and FM3230): To
ensure proper system operation, this system must be retested in accordance with
NFPA 72 after any programming change. Reacceptance testing is also required
after any addition or deletion of system components, and after any modification,
repair, or adjustment to system hardware or wiring.
Limitation of liability
To the maximum extent permitted by applicable law, in no event will UTCFS be
liable for any lost profits or business opportunities, loss of use, business
interruption, loss of data, or any other indirect, special, incidental, or
consequential damages under any theory of liability, whether based in contract,
tort, negligence, product liability, or otherwise. Because some jurisdictions do not
allow the exclusion or limitation of liability for consequential or incidental
damages the preceding limitation may not apply to you. In any event the total
liability of UTCFS shall not exceed the purchase price of the product. The
foregoing limitation will apply to the maximum extent permitted by applicable law,
regardless of whether UTCFS has been advised of the possibility of such
damages and regardless of whether any remedy fails of its essential purpose.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edwards LaserSense 100 and is the answer not in the manual?

Edwards LaserSense 100 Specifications

General IconGeneral
BrandEdwards
ModelLaserSense 100
CategorySmoke Alarm
LanguageEnglish

Related product manuals