What to do if my EemaX Water Heater shows a freeze warning?
A freeze warning on your EemaX Water Heater indicates that the inlet temperature is too low (below 35°F/2°C). To resolve this, increase the temperature of the inlet water to meet product specifications.
General| Voltage | 240 V |
|---|---|
| Wattage | 3500W |
| Power | Electric |
| Frequency | 50/60 Hz |
| Temperature Control | Electronic |
| Water Connection | 1/2" NPT |
| Heating Element | Copper |
Outlines critical connection precautions, prohibited materials, and essential system pressure and flow rate requirements.
Specifies requirements for branch circuits, cable types, temperature ratings, and circuit breaker protection.
Explains power cable routing, connections, and the critical importance of proper system grounding.
Troubleshoots low heat output and outlet thermistor failure indicated by specific LED flash patterns.
Explains over-temperature warnings and protection modes indicated by LED flash sequences.
To Next Page