What to do if my EemaX FlowCo SPEX55 shows a freeze warning?
A freeze warning on your EemaX Water Heater indicates that the inlet temperature is too low (below 35°F/2°C). To resolve this, increase the temperature of the inlet water to meet product specifications.
General| Brand | EemaX |
|---|---|
| Model | FlowCo SPEX55 |
| Category | Water Heater |
| Language | English |
Heater must be installed in a location protected from freezing temperatures.
Details on pressure, flow rate, and recommended fittings for plumbing connections.
Warning against using pipe dope, Teflon tape, and soldering to prevent damage and warranty voidance.
Table of model specifications including voltage, power, current, and wire size.
Emphasizes the critical importance of grounding the electrical system for safety.
Verify water flow and absence of air pockets before energizing the heater.
Part numbers for 3/8" nuts and sleeves used in compression fittings.
To Next Page