What to do if my EemaX FlowCo SPEX65 Water Heater shows a freeze warning?
A freeze warning on your EemaX Water Heater indicates that the inlet temperature is too low (below 35°F/2°C). To resolve this, increase the temperature of the inlet water to meet product specifications.
How to fix outlet thermistor failure in EemaX Water Heater?
An outlet thermistor failure in your EemaX Water Heater is caused by an interrupted or disconnected outlet thermistor. Inspect the connections and wiring of the outlet thermistor to resolve this issue.
Specifies pressure and flow rate requirements for the heater.
Details voltage, power, current, and wire size for models.
Lists part numbers for 3/8" nuts and sleeves.
Lists part numbers for element cartridges, control boards, and relays by model.
General| Power | 6.5 kW |
|---|---|
| Voltage | 240 V |
| Maximum Flow Rate | 1.5 GPM |
| Water Connection | 1/2" NPT |
| Minimum Flow Rate | 1.5 L/min |
| Activation Flow Rate | 1.5 L/min |
To Next Page