What to do if my EemaX FlowCo SPEX8208 Water Heater shows a freeze warning?
A freeze warning on your EemaX Water Heater indicates that the inlet temperature is too low (below 35°F/2°C). To resolve this, increase the temperature of the inlet water to meet product specifications.
General| Brand | EemaX |
|---|---|
| Model | FlowCo SPEX8208 |
| Category | Water Heater |
| Language | English |
Basic safety precautions, grounding instructions, and electrical code compliance for safe operation.
Overview of the Eemax FlowCo as a non-thermostatic electric tankless water heater for handwashing.
Ensure the heater is installed in a location protected from freezing temperatures.
Avoid threaded fittings with pipe dope/Teflon tape and do not solder connections to the heater.
Ensure electrical breaker is OFF and all mounting/plumbing is complete before starting electrical hook-up.
Proper grounding is essential to prevent serious injury, death, or property damage.
Verify water flow, open valves, and ensure water is not frozen before switching on the electrical breaker.
Always turn the unit's power OFF before removing any protective covers for troubleshooting.
Periodically clean the faucet aerator and the filter screen in the brass inlet fitting to maintain water flow.
To Next Page