EFD 800 - For Thinner Fluids; For Cyanoacrylates or Watery-thin Fluids

If you use low to medium viscosity fluids, the white
SmoothFlow
™
piston has several advantages.
First, vacuum adjustment is much less sensitive.
Second, the piston prevents fumes from the fluid
being exhausted into the work environment. Third,
the piston prevents fluid backflow into the dis-
penser if the barrel is inadvertently turned upside
down. Fourth, using the piston makes it easy and
safe to change tips without dripping.
Note: If you use watery-thin fluids such as solvents,
cyanoacrylates and anaerobics, specify the ULTRA
System
™
with the blue LV Barrier
™
. Available in
3cc and 10cc sizes.
For Thinner Fluids
Fumes cannot escape.
For Cyanoacrylates
or Watery-thin Fluids
SmoothFlow
™
piston
prevents fluid backflow.
No air gap when using the
SmoothFlow
™
piston.
Note: If you choose not to use the piston,
please refer to page 9 for instructions.
Blue LV Barrier
™
for improved
control of very low viscosity fluids.
Note: The LV Barrier
™
works best
with an air gap between the barrier
and fluid.
Maximum
1/2 fill