☎
Introduction
Model 800 fluid dispenser provides years of trouble-free, productive
service. This Operating Guide will help you maximize the usefulness
of your new dispenser.
Please spend a few minutes to become familiar with the controls and
features of your new dispenser. Follow our recommended testing
procedures. Review the helpful information we have included based
on over 30 years of industrial dispensing experience.
Most questions you will have are answered in this Guide. However,
if you need assistance, please do not hesitate to contact EFD or your
authorized EFD distributor.
In the US, call 800-556-3484.
In Mexico, call 001-800-556-3484.
In the UK, ring free 0800 585733.
The EFD Pledge
We pledge that you will be completely satisfied with our products.
We endeavor to ensure that every EFD product is produced to our
no-compromise quality standards.
If you feel that you are not receiving all the support you require,
or if you have any questions or comments, I invite you to write or call
me personally.
Our goal is to build not only the finest equipment and components,
but also to build long-term customer relationships founded on superb
quality, service, value and trust. Randall Richardson, President
Model 800 Specifications
Input voltage: Selectable
100/120/220 VAC 50/60Hz 26/20 VA
Air input: 80 to 100 psi (5.5 to 6.9 bar)
Internal voltage: 24 VAC
Foot pedal voltage: 24 VAC
800
7¼ x 8½ x 2⅝" 3 lb 4 oz
(18.4 x 21.6 x 6.7 cm) (1.48 kg)
Air output: 0 to 100 psi (0 to 7.0 bar)
To Next Page
Loading...
Need help?
General
