CONTENTS INTRODUCTION
INTRODUCTION
SAFETY
IN THE BOX
HARDWARE INSTALLATION
Prior to Installation
Mounting Individual or Multiple Circuits
Monitor Installation Considerations
Installing the CT Sensors
MONITOR SETUP
Linking the Transmitter and Monitor
Setting the Time and Date
Setup Instructions
Dual Tariff Mode
How To Change Functions
How To Change Modes
FAQS
TECHNICAL INFORMATION
INSTALLATION NOTES
TECHNICAL NOTES FOR ELECTRICIAN
Energy metering and monitoring are at the heart of energy management, understanding when
and where your energy is consumed is key to saving money.
The e2 wireless electricity monitor shows the amount of energy that a household is consuming
at the time the display is read. The display can also give the user a reading showing usage in
financial terms. You can walk around the home with your monitor device, switching appliances
on and off, to see the difference that each one makes. With a few small changes in your
consumption behaviour the e2 can help you reduce your energy costs.
Ask Johnny
If you have any questions about using your efergy monitor or if you’d like further advice on
monitoring electricity at home, please feel free to contact us, or visit the website for up to date
information, downloads and frequently asked questions.
Email your questions to;
info.usa@efergy.com for US
info.canada@efergy.com for Canada
Email your technical questions to;
askjohnny@efergy.com for US and Canada
2
3
5
6
7
9
10
11
12
13
15
17
18
20
21
21
22
2
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.ca
To Next Page
Loading...
