Need help?Do you have a question about the Efergy E2 and is the answer not in the manual?
Transmission| frequency | 433.52 MHz |
|---|---|
| transmission time | 6s, 12s, 18s |
| transmission range | 40m-70m |
Voltage and Current| voltage range (in the sensor) | 110V-400V |
|---|---|
| measuring current | 50mA-95A |
| accuracy | >90% |
Guides on finding the electricity meter and its power feed cable in the UK/Ireland.
Guides on finding the electricity meter and its power feed cable in Sweden, Norway, and Finland.
Step-by-step instructions on how to clamp sensors onto the power cables.
Explains how to connect the fitted sensors to the transmitter unit.
How to set the correct voltage for the electricity supply.
How to select the appropriate currency for cost readings.
Confirms the single tariff setup and moves to cost settings.
Setting the correct unit cost per kWh for accurate billing.
Configuring the high-energy consumption alarm and buzzer.
To Next Page
