Effer DMU 2000 - Page 63

Electronic device DMU2000 - DMU3000 - DMU3000 PLUS
Electronic device DMU2000 - DMU3000 - DMU3000 PLUS
THE POWER OF PERFORMANCE
63
V) The hook for load attacchment to winch cable, is electronic, and it transmits the
value of the load applied (optional)
The warning lights 1, 2, 3, and 7 flashes in sequence,
and an intermittent quick acoustic alarm is emitted Bip -Bip - Bip - Bip
CAUSE
1) Pin battery low
2) Error of communication between DMU and pin
3) Error of radio communication between pin and its receiver.
CHECK
Check for pin switching ON, and check cables connecting DMU and pin (CAN-bus).
SOLUTION
Load the pin battery by the suitable cable or replace battery. If fault can not be found out, get in touch with an
EFFER authorized workshop immediately.
4
7
1
2
3