SpeedStream PPPoE Modem
8
Configuring Computer Network Settings
To access the Internet through the SpeedStream PPPoE modem, the TCP/IP protocol must be installed on
your computer. If TCP/IP is not already installed on your computer, refer to your system documentation
or online help for instructions.
The default network settings for the SpeedStream PPPoE modem are:
IP Address: 192.168.254.254
Subnet Mask: 255.255.255.0
Windows 95
/
98
/
ME
1. On the Windows taskbar, click Start,
point to Settings, and then click Control
Panel.
The Windows Control Panel displays.
2. In Control Panel, double-click Network.
The Network dialog box displays.
3. On the Configuration tab of the Network
dialog box, select the TCP/IP entry for
your Ethernet adapter; then click
Properties.
The TCP/IP Properties dialog box
displays.
Note
The components list for your
computer may differ from this illustration.
To Next Page
Loading...
Need help?
General